WAGO-1/0-SYSTEM 750

I/O Module

Universal Basic Module

Assembly
Power jumper contacts on the field side
Data contacts

Fine modularity for on -rail assembly...
Safe, automatic connection by tinned, brself-
cleaning slide contacts with high contact safety
through make -first, break -last ground (earth)
contact.
Safe, automatic connection by gold-plated, self-
cleaning slide contacts with high contact safety.

...secure connection with dovetails.

Exchange within the assembly

Quick tool-free exchange of I/O module within assembly node.

WxH*xL(mm) 12x56x100
* from upper-edge of DIN 35 rail

Series 750 Series 753

Locking the fieldbus coupler
Accessing the programming interface
End module required

1 locking

2 releasing
Accessing the programming interface.
Programming a fieldbus coupler.
For WAGO-I/O O-CHECK 2, WAGO-I/O-PRO CAA.
The end module physically terminates
the fieldbus node and guarantees
a safe data transmission

Strip length, see packaging or instructions

Color coded for simplicity

Molded marking of clamping units

Marking of clamping units by colored miniature WSB markets

Group marking carrier (can be removed and replaced) with large area for self-marking.

yellow
red
green
blue
colorless

- digital inputs
- digital outputs
- analog inputs
- analog outputs
- supply and
specialty modules

Different functions marked by transparent colored group marked carriers.

CAGE CLAMP^® connection
Status indication
Testing

Vibration-proof, fast and maintenance-free
wiring of 28-14 AWG (0.08-2.5mm²)
LED diagnostic and status indications for safe
start-up and system control
Signal tracing with wired conductors

Fuse holder
Pluggable wiring

Function at locked position 1:
Power output to I/O group is off.
Fuction at locked position 2: Easy fuse
replace-ment via hinged cover.
Use UL-recognized fuses only!
Series 753, see Full Line Catalog,
Volume 3 or at www.wago.vn

ECO Fieldbus Couplers, Fieldbus Couplers, Programmable Fieldbus Controllers Series 750

ECO Fieldbus Couplers*

for digital and analog signals
0.08 mm² - 1.5 mm² / AWG 28- 16
Voltage supply 24 V (15% ... +20%)
Module width 50 mm/1.97 in

Fieldbus Couplers*

for digital and analog signals
0.08 mm² - 2.5 mm² / AWG 28 - 14
Voltage supply 24 V (-15% ... +20%)
Module width 51 mm/2.01 in

Fieldbus Controllers*,

programmable
for digital and analog signals
0.08 mm² - 2.5 mm² / AWG 28 - 14
Voltage supply 24 V (-15% ... +20%)
Module width 51 mm/2.01 in

Description	Baud rate	Item No.	Description	Baud rate	Item No.	Description	Baud rate	Item No.
PROFIBUS DP ECO	12 Mbaud	750-343	PROFINET	100 Mbit/s	750-340	PROFIBUS DP/V1	12 Mbaud	750-833
			PROFINET	100 Mbit/s	750-370
INTERBUS ECO	500 kbaud	750-344	2 ports			ETHERNET TCP/IP	10/100 Mbit/s	750-871
						2 ports
INTERBUS ECO	2 Mbaud	750-345	PROFIBUS DP/FMS	12 Mbaud	750-303	ETHERNET TCP/IP	10/100 Mbit/s	750-873
			PROFIBUS	12 Mbaud	750-333	RS-232
DeviceNet ECO	500 Kbaud	750-346	PROFIBUS	1.5 Mbaud	750-331	ETHERNET TCP/IP	10/100 Mbit/s	750-841
			with fiber optic connection			ETHERNET TCP/IP	10 Mbit/s	750-842
CANopen ECO MSS	10 Kbd-1 Mbd	750-347
			ETHERNET TCP/IP	100 Mbit/s	750-341	DeviceNet	500 Kbaud	750-806
CANopen ECO	10 Kbd-1 Mbd	750-348	ETHERNET TCP/IP	10 Mbit/s	750-342
						CANopen	10 Kbad-1 Mbd	750-837
			DeviceNet	500 Kbaud	750-306	MCS
			DeviceNet	500 Kbaud	750-346	CANopen	10 Kbd-1 Mbd	750-838
						D-Sup
			CANopen	10 Kbd-1 Mbd	750-307
			CANopen	10 Kbd-1 Mbd	750-337	MODBUS RS-485	150-19200 Bd	750-812
			CANopen	10 Kbd-1 Mbd	750-338	MODBUS RS-232	150-19200 Bd	750-814
						MODBUS RS-485	1.2-115.2 KBd	750-815
			MODBUS RS-485	150-19200 Bd	750-312	MODBUS RS-232	1.2-115.2 KBd	750-816
			MODBUS RS-485	1.2-115.2 Kbd	750-315
			MODBUS RS-232	150-19200 Bd	750-314	INTERBUS	500 Kbaud	750-804
			MODBUS RS-232	1.2-115.2 Kbd	750-316
						IEC 60870-5	10/100 Mbit/s	750-872
Accessories, Series 750			INTERBUS	500 Kbaud	750-304	Telecontroller
Accessories, Series 750			INTERBUS	500 Kbaud	750-334	KNX	10/100 Mbit/s	750-849
Fieldbus connection			with fiber optic connection
	Fast and maintenance-free		CC-Link	156 Kbd-10 Mbd	750-310	BACnet	10/100 Mbit/s	750-830
	CAGE CLAMP^® connection
			FireWire	100/200/400 Mbd	750-339	LonWorks^®	78 Kbps	750-819

			CAL	10 Kbd-1 Mbd	750-305	Linux^®	10/100 Mbit/s	750-860
PROFIBUS		750-960				Accessories and software
with D-Sub male connector, 9-pole			II/O-LIGHTBUS	2.5 Mbaud	750-300	Accessories and software
PROFIBUS		750-971		Digital and analog signals		WAGO-I/O-CHECK 2		759-302
with D-Sub male connector, 9-pole, suitable for S7-PLC			LonWorks^®	78 Kbps	750-319	WAGO-I/O-SYSTEM 750 commissioning tool
PROFIBUS		750-972				WAGO-I/O-PRO CAA		759-333
with D-Sub male and female connectors; 9-pole			LON Dara Exchange Coupler		750-319/004-000	IEC 61131-3 programming tool
ETHERNET		750-975	(peer-to-peer)	78 Kbps		WAGO OPC Server		759-311
RJ-45 IP20 connector						MODBUS/TCP
CANopen		750-963	SECOS III	100 Mbit/s	750-351	WAGO DLL		759-312
with D-Sub female connector, 9-pole			2 ports			MODBUS/TCP
INTERBUS (IN)		750-961
with D-Sub female connector, 9-pole
INTERBUS (OUT)		750-962				RS-232 Communication Cable		750-920
with D-Sub male connector, 9-pole						Connection between PC and coupler/controller
CC-Link		750-965				WAGO Radio Adapter		750-921
with D-Sub male connector, 9-pole						Radio connection between PC and coupler/controller
						USB Service Cable		750-923
More accessories in the Full Line Catalog, Volume 3						Connection between PC and coupler/controller

You can find approvals and technical data in our Full Line Catalog, Volume 3 or at www.wago.vn.

Industrial Compact PC
Digital Input Modules and Digital Output Modules

Series 758
Series 750/753

Industrial Compact PC*
0.08 mm²- 2.5 mm² / AWG 28 - 16
Voltage supply 24 V (-15% ... +20%)
Dimensions 172 x 65 x 100 mm

Digital Input Modules (DI)*
0.08 mm²- 2.5 mm² / AWG 28 - 16
Voltage supply 24 V (-15% ... +20%)
Module width 12 mm/0.47 in 24 mm/0.94 in

Digital Output Modules (DO)*
0.08 mm²- 2.5 mm² / AWG 28 - 16
Voltage supply 24 V (-15% ... +20%)
Module width 12 mm/0.47 in 24 mm/O.94 in

Description	Item No.	Description	Voltage	Item No.	Description	Voltage	Item No.
WAGO-I/O-IPC	750-870	2-Channel DI	DC 24V, h.-s. s., 3ms	750-400 1	1-Channel DO	AC 230V, 16 A	750-523
Industrial compact PC			DC 24V, h.-s. s., 0.2 ms	750-401 1		1 make contact, isolated outputs
Interfaces:			DC 24V, h.-s, s., 3ms	750-410 1
LAN 2 x 10Base-T/100Base-TX			Proximity witch
Fieldbus (optional)			DC 24V, h.-s s., 0.2 ms	750-411 1	2-Channel DO	DC 24V, h.-s s., 0.5 A	750-501 1
Serial 1 x COM 1, EIA RS-232 compliant			Proximity witch			DC 24V, h.-s s., 2 A	750-502 1
USB 2 x USB port acc. to Specification 1.1			DC 24V, h.-s s., 3 ms	750-418 1		DC 24V, h.-s s., 0.5 A	750-506 1
Digital input 2 x DI, isolated			Diagnostics/ acknowledgment			Diagnostics
Digital 2 x DO, isolated			DC 24V, h.-s s., 3 ms	750-421 1		DC 24V, h.-s s., 2 A	750-508 1
			Diagnostics			Diagnostics
WAGO-I/O-IPC	758-870		DC 24V, NAMUR	750-425 1		AC/DC 230V,	750-509 1
			Proximity witch acc. to DIN EN 50227			SSR 0.3 A
			DC 24V,	750-424 1		AC/DC 230V,	750-522
WAGO-I/O-IPC	758-870/ 000-001		Intruder detection			SSR 3.0 A(<30 s)
with PROFIBUS master			DC 48V, h.-s s., 3 ms	750-412		AC 125V, 0.5 A	750-514 1
			DC 60V, h.-s s., 3 ms	753-429		2 changeover contacts, isolated outputs
WAGO-I/O-IPC	758-970/ 000-002		DC 110V	750-427 1		AC 250V, 1.0 A	750-517 1
with CANopen master			high-side and low-side witching			2 changeover contacs, isolated outputs
			AC 120V, h.-s s.,	750-406 1		AC 250V, 2.0 A	750-512 1
WAGO-I/O-IPC	758-870/ 000-004		2- to 4-conductor connection			2 make contacts, non-floating
with PROFIBUS slave			AC 230V, h.-s s.	750-505 1		AC 250V, 2.0 A	750-513 1
						2 make contacts, isolated outputs
WAGO-I/O-IPC	750-870/ 000-010	4-Channel DI	DC 5V, h.-s s., 0.2 ms	750-414 1
(128 Mbytes)			DC 24V, h.-s s., 3 ms	750-402 1
			DC 24V, h.-s s., 0.2 ms	750-403 1	4-Channel DO	DC 5V, h.-s s., 20 mA	750-519
WAGO-I/O-IPC	750-870/ 000-011		DC 24V, h.-s s., 3 ms	750-432 1		DC 24V, h.-s s., 0.5 A	750-504 1
with PROFIBUS master (28 Mbytes)			DC 24V, h.-s s., 0.2 ms	750-433 1		DC 24V, h.-s s., 0.5 A	750-531 1
			DC 24V, h.-s s.	750-422 1		DC 24V, l.-s s., 0.5 A	750-516 1
WAGO-I/O-IPC	758-870/ 000-012		Pulse extension			DC 24V, h.-s s., 0.5 A	750-532 1
with CANopen master (128 Mbytes)			DC 24V, 3 ms l.-s s.	750-408 1		Diagnostics
			DC 24V, h.-s s., 0.2 ms	750-409 1
WAGO-I/O-IPC	758-870/ 000-014		AC/DC 24V, 20 ms	750-415 1
with PROFIBUS slave (128 Mbytes)			AC/DC 24V, h.-s s., 50 ms	750-423 1	8-Channel DO	DC 5/12 V, h.-s s., 1 A	733-534
			Power jumper contacts			short-circuit protected
WAGO-I/O-IPC-G2 Linux 2.6	758-870/ 000-310		AC/DC 42V	750-428 1		DC 24V, h.-s s., 0.5 A	750-530 1
with Geode 266 MHz			AC 120/230V, h.-s s.	733-440		DC 24V, l.-s s., 0.5 A	750-536
			10 ms, AC 120...230V			DC 24V, h.-s s., 0.5 A	750-537
WAGO-I/O-IPC-C6 Linux 2.6	758-874/ 000-010					Diagnostics
with Celeron^® 600 MHz		8-Channel DI	DC 5/12 V, h.-s s.	753-434		AC 120/230 V, h.-s s.	753-540
			0.2 ms			0.25 A, AC 120...230V
WAGO-I/O-IPC-C10 Linux 2.6	758-875/ 000-010		DC 24V, h.-s s., 3 ms	750-430 1
with Celeron^®M 1 GHz		DC 24V, h.-s s., 0.2 ms	750-431 1
			DC 24V, l.-s s., 3 ms	750-436
			DC 24V, l.-s s., 0.2 ms	750-437


		h.-s s. high-side witching			h.-s s. high-side witching
		l.-s s. low-side witching			l.-s s. low-side witching
Volume 3

1 also available with pluggable connector (753 Series).

Analog Input Modules, Analog Output Modules, Specialty Modules
Series 750 and 753

Analog Input Modules (AI)*
0.08 mm² - 2.5 mm² / AWG 28 - 16
Voltage supply 24 V (-15% ... +20%)
Module width 12 mm/0.47 in 24 mm/0.94 in

Analog Output Modules (AO)*
0.08 mm² - 2.5 mm² / AWG 28 - 16
Voltage supply 24 V (-15% ... +20%)
Module width 12 mm/0.47 in 2 24 4 m m r m/0.94 in

Specialty Modules*
0.08 mm² - 2.5 mm² / AWG 28- 16
Voltage supply 24 V (-15% ... +20%)
Module width 12 mm/0.47 in 24 mm/0.94 in 48 mm/1.89 in

Description		Item No.	Description		Item No.	Description	Item No.
1-Channel	Strain gauge	750-491	2-Channel AO	0-20 mA	750-552 1	Up/Down Counter	750-404 1
				4-20 mA	750-554 1	DC 24V, 100 kHz
2-Channel AI	Differentinal inputs			0-10 V	750-550 1	2-Channel Up/Down Counter	750-638 1
	0-20 mA	750-452 1		0-10 V	750-560	DC 24V, 500 Hz
	4-20 mA	750-454 1		10 bits, 100 mW, 24 V		2-Channel Pulse Width Output Module	750-511
	0-1 A AC/DC	750-475 1		±10 V	750-556 1	DC 24V, 0.1 A
	0-10 V AC/DC	750-477 1				SSI Transmitter Interface	750-630
	±10 V DC	750-456 1	4-Channel AO	0-20 mA	750-553	24 bits, 125 kHz, Gray
				4-20 mA	750-555	Incremental Encoder Interface	750-631
2-Channel AI	single-ended			0-10 V	750-559 1	16-bit counter
	0-20 mA	750-465 1		±10 V	750-557 1	Incremental Encoder Interface	750-637
	0-20 mA, short-circuit protected					32-bit counter, RS-422 connection
		750-470				Digital Impulse Interface	750-635 1
	0-20 mA, 16 bits	750-472 1				for magentostrictive distance measurement sensors
	4-20 mA	750-466 1				RS-232 C Serial Interface	750-650 1
	4-20 mA, short-circuit protected					1200-19200 baud
		750-473				Serial Interface RS-485	750-653 1
	4-20 mA, 16 bits	750-474 1				1200-19200 baud
	4-20 mA, 16 bits, HART	750-482 1				TTY Interface 20 mA	750-651
	0-10 V DC	750-467 1				Current loop
	0-10 V DC, 16 bits	750-478 1				Data Exchange Module	750-654
	±10 V DC, 16 bits	750-476 1				62500 baud
						DALI/DSI Master Module	750-641
2-Channel	Differentinal measurement inputs
	0-20 mA	750-480 1				Radio Receiver Module	750-642
	4-20 mA	750-492 1				EnOcean
	±10 V DC	750-479 1				Radio Receiver Module	750-644
	0-30 V DC	750-483 1				Bluetooth
						MP-Bus Module	750-643
2-Channel AI	Pt100/RTD	750-461 1				Master module
						RTC Module	750-640
2-Channel AI	Thermocouple	750-469 1				Real-time clock
	K/Diagnostics					AS-Interface Master Module	750-655
4-Channel	single-ended
	0-20 mA,	750-453 1				Vibration Monitoring	750-645
	4-20 mA	750-455 1				2-channel vibration velocity/bearing condition monitoring
	0-10 V DC	750-468				Stepper Module	750-670
	0-10 V DC	750-459 1				Stepper controller RS-422
	±10 V DC	750-457 1				Stepper Module	750-671
						Stepper controller 24V/1.5 mA
4-Channel AI	Pt100/RTD	750-460				DC-Drive Controller	750-636
						24V/5 A
						Stepper Module	750-672
						Stepper Controller 70 V /7.5 A 6IN, 2OUT
						Stepper Module	750-673
						Servo stepper controller 70 V / 7.5 A 6IN, 2OUT

1 also available with pluggable connector (753 Series).
For technical explanations and abberviations, see technical section

PROFIsafe Modules, Ex i Intrinsically Safe Modules, System Modules
Series 750 and 753

PROFIsafe Modules*
0.08 mm² - 2.5 mm² / AWG 28 - 16
Voltage supply 24 V (-15% ... +20%)
Module width 24 mm/0.94 in

Ex i Intrinsically Safe Modules*
0.08 mm² - 2.5 mm² / AWG 28 - 16
Voltage supply 24 V (-15% ... +20%)
Module width 12 mm/0.47 in 24 mm/0.94 in

System Modules*
0.08 mm² - 2.5 mm² / AWG 28 - 16
Voltage supply 24 V (-15% ... +20%)
Module width 12 mm/0.47 in 24 mm/0.94 in

Description Item No.
4 -Channel Input Module 750-661/000-0021
4 inputs Cat. 4/SIL 3, PROFIsafe 2.0
8 -Channel Input Module 750-662/000-0021
8 inputs Cat. 4/SIL 3, PROFIsafe 2.0
4/4 -Channel Input/Output Module 750-667/000-002 1
4 inputs and 4 outputs Cat. 4/SIL 3, PROFIsafe 2.0
8 -Channel Input Module 750-660/000-001
8 inputs Cat. 4/SIL 3, PROFIsafe 1.3
4 -Channel Input/Output Module 750-665/000-001
4 inputs and 4 outputs Cat. 4/SIL 3, PROFIsafe 1.3
Power Switch Module 750-666/000-001
2 inputs Cat. 2/SIL 2 or 1 input Cat. 4/SIL 3
1 output Cat. 2/SIL 2 or 1 output Cat. 3/SIL 2
2 outputs Cat. 2/SIL 2 or 1 output Cat. 4/SIL 3

WAGO PROFIsafe modules can be used in safety appli- cations up to category 4 in accordance with EN 954-1 or SIL 3 according to base standard IEC 61508 and AK 6 (DIN V 19250).

Status, configuration and diagnostics are available in every module.

Description Item No.
1 -Channel Digital Input 750-435
NAMUR Ex i
2 -Channel Digital Input 750-438
NAMUR Ex i
2 -Channel Digital Output 750-535
DC 24 V, Ex i
2 -Channel Analog Input 750-485
single -ended, 4 - 20 mA, Ex i
2 -Channel Analog Input 750-481/003-000
RTD EEx i
2 -Channel Analog Output 750-585
0 - 20 mA, Ex i
Supply Module 750-625
with fuse, Ex i

The WAGO-1/0-SYSTEM 750 can be used in hazardous areas of zone 2.

A direct connection to the sensors and actuators of zones 0 and 1 is now also possible.

Description Item No.
Internal Data Bus Extension Module 750-627
End module
Internal Data Bus Extension Module 750-628
Coupler module
Supply Module 750-602
DC 24 V, without fuse
Supply Module 750-601
DC 24 V, with fuse carrier
Supply Module 750-610
DC 24 V, with fuse carrier, diagnostics
Supply Module 750-623
DC 24 V 5 - 15V
Supply Module 750-613
DC 24 V, passive
Supply Module 750-615
AC 120 V, with fuse carrier
Supply Module 750-612
AC/DC 0-230 V, without fuse
Supply Module 750-609
AC 230 V, with fuse carrier
Supply Module 750-611
AC 230 V, with fuse carrier, diagnostics
Filter Module 750-624
for field side power supply
Filter Module 750-626
for system and field side power supply
Field Side Connection Module 750-6041
DC 0 V
Field Side Connection Module 750-6031
DC 24 V
Field Side Connection Module 750-6141
AC/DC 0-230 V
Separation Module 750-616
Separation Module 750-621
with power jumper contacts
Binary Spacer Module 750-622
with supply module
End Module 750-600

* You can find approvals and technical data in our Full Line Catalog, Volume 3 or at www.wago.vn.

WAGO SPEEDWAY 767
The New Performance Standard for Cabinet -Free Control

The move from parallel wiring toward fieldbus technology has revolutionized control and installation technology over the past decade. In the following years, even greater efficiency has been achieved for project engineering, assembly, commissioning and system operation through decentralized, 1P67 -protected and robust field bus components. Now, cabinet -free automation has established itself as an industrial standard.

In addition to requirements for a high degree of protection, a robust design and standardized connection technology, there is an increasing demand for highly functional 1P67 features that were once only reserved for IP20 systems:

• Speed, synchrony
• Safety functionality

• Programmable in accordance with IEC 61131-3
• Diagnostic capability

Typically, machines and systems must be tailored to suit individual requirements while meeting tight customer deadlines. Customer requirements must be incorporated easily and rapidly and then the system must be designed and installed. This makes modular IP67 systems ideal as they are easily scalable and expandable. These systems allow machines to be first mounted in the factory, tested and then accepted by the customers. Then, they are dismantled, re -installed on customer's site and put into operation.

• Modular design
• High-performance data transfer
• CoDeSys 3 programmable to IEC61131-3
• FDT/DTM parameter setting
• Asynchronous and synchronous data processing
• Fieldbus independent
• USB interface
• Safety feature
• Excellent EMC protection
• Effective power supply concept
• Temp. from -25°C to +60°C
• IP67 degree of protection (fully encapsulated)
• Screw and DIN -rail mounting op- tions
• Ergonomic design

Couplers,
Programmable Couplers

I/O Modules
Digital Input Modules
8 inputs 24VDC
Digital Output Modules
8 outputs 24VDC, 0.5 A
8 outputs 24VDC, 2.0A
Analog Input Modules
4 inputs U/I, RID
Analog Output Modules
4 inputs U/I
Specialty Modules
Power Divider
PROFIsafe

Fieldbus Couplers, Programmable Fieldbus Couplers
Input and Output Modules, Series 767
Sensor/Actuator Boxes, Series 757

767 Series Fieldbus Couplers*
IP67 protection class
Operating voltage DC 24 V (-25% ... +30%)
Dimensions (W x H xl.)
75x 117 x 25 mm

767 Series I/O Modules*
IP67 protection class
Operating voltage DC 24 V (-25% ... +30%)
Dimensions (W x H xl.)
50x 117 x26 mm

767 Series Modules*
IP67 protection class
Operating voltage DC 10 V ... 30 V
Dimensions (W x H x L.)
M12: 60 x 117/123/152 x 26 mm
M 8: 30 x 117/123/152/175 x 20 mm

Designation Item No.
Fieldbus Couplers
PROFINET 767-1201
PROFIBUS DP/ V1 767-1101
ETHERNET 767-1301
DeviceNet 767-1401
CANopen 767-1501
Programmable Fieldbus Couplers
PROFIBUS DP/ V1 767-2101
ETHERNET 767-2301
CANopen 767-2501

Accessories, Series 767

Spacer module, with fixing lugs for cable ties

767-0111

Protective caps, for unused sockets

M8 756-8101
M12 756-8102
1 piece per packing unit

Protective caps, for unused plugs

M12 755-809
M23 755-837
1 piece per packing unit

Carrier rail adapter,

for couplers 767-121
for I/O modules 767-122

Designation Item No.
Digital Input Modules, 24 V DC
8 outputs (8 x M8) 767-3801
8 inputs (4 x M12, two outputs per connector) 767-3802
Digital Output Modules, 24 V DC, 0,5 A
8 outputs (8 x M8) 767-4801
8 outputs (4 x M12, two outputs per connector)767-4802
Digital Output Modules, 24 V DC, 2 A
8 outputs (8 x M8) 767-4803
8 outputs (4 x M12, two outputs per connector)767-4804
Analog Input Modules
Voltage/current (4 x M12) 767-6401
Resistance temperature device (4 x M12)767-6402
Analog Output Module
Voltage/current (4 x M12) 767-7401
Power Divider, 24 V DC
6 outputs (6 x M12) 767-9101
System bus cable, with both ends of cable fitted, straight

0.2 m 756-1305/0060-0002
0.3 m 756-1305/0060-0003
0.5 m 756-1305/0060-0005
1 m 756-1305/0060-0010
2 m 756-1305/0060-0020

Supply cable, with both ends of cable fitted, straight

0.2 m 756-3105/0040-0002
0.3 m 756-3105/0040-0003
0.5 m 756-3105/0040-0005
1 m 756-3105/0040-0010
2 m 756-3105/0040-0020

USB communication cable

3 m 756-4101/0042-0030

Marker strips, for couplers and I/O modules

8 x M8 767-0101
4 x M12 767-0102
Power divider 767-0103

Marking pen, for permanent marking

210-110

Designation Item No.
M12 Sensor/Actuator Boxes with M23 Connector
4 -pole, 4 -way 757-144
4 -pole, 6 -way 757-164
4 -pole, 8 -way 757-184
5 -pole, 4 -way 757-145
5 -pole, 6 -way 757-165
5 -pole, 8 -way 757-185
M12 Sensor/Actuator Boxes with 5m Connect.
Cable
4 -pole, 4 -way 757-244/000-005
4 -pole, 6 -way 757-264/000-005
4 -pole, 8 -way 757-284/000-005
5 -pole, 4 -way 757-245/000-005
5 -pole, 6 -way 757-265/000-005
5 -pole, 8 -way 757-285/000-005
M8 Sensor/Actuator Boxes with M16 Connector
3 -pole, 4 -way 757-343
3 -pole, 6 -way 757-363
3 -pole, 8 -way 757-383
3 -pole, 10 -way 757-303
M8 Sensor/Actuator Boxes with 5m Connect. Cable
3 -pole, 4 -way 757-443/000-005
3 -pole, 6 -way 757-463/000-005
3 -pole, 8 -way 757-483/000-005
3 -pole, 10 -way 757-403/000-005

Accessories, Series 757

Spacer module for sensor/actuator box

4 -way 757-040
6 -way 757-060
8 -way 757-080
10 -way 757-000

M12 protective cap (sensor/actuator),

for unused connectors
755-814
10 pieces per packing unit

Marker strips for M8 sensor/actuator box

4 -way 757-0041
6 -way 757-0061
8 -way 757-0081
10 -way 757-0001

More accessories in the Full Line Catalog, Volume 3.

*You can find approvals and technical data in our Full Line Catalog, Volume 3 or at www.wago.vn.

TO-PASS^®
Scalable Telecontrol Solutions from Fault Detector to Intelligent Telecontrol PLC
Series 761

TO-PASS® Telecontrol Module S*
GSM mobile radio network
SMS, CSD, GPRS (Web)
4 x DI, 4 x DO, 2 x Al
Operating voltage DC 8 V ... 36 V
Closed current 35 mA
Dimensions (WxHxl) 109 x 105 x 78 mm
TO-PASS®

Telecontrol Module M*
GSM mobile radio network
SMS, CSD, GPRS (Web)
8 x DI, 4 x DO, 8 x Al, 2 x AO
Operating voltage DC 8 V ... 36 V
Closed current 35 mA
Dimensions (WxHxL) 109 x 105 x 78 mm

Designation Item No.
Telecontrol Module S 761-100
Telecontrol Module S 2A1 761-101
Telecontrol Module S WEB 761-102
Telecontrol Module S 2A1 WEB 761-103

Accessories, Series 761

Dipole antenna,

with 2.5 m cable
761-9001

Antenna,

with 2.5 m cable,
theft -proof
761-9002

Rod antenna,

long
761-9003

Connection cable for rod antenna,

6 m long
761-9004

USB adapter,

with 1 m connection cable
761-9005

Designation Item No.
Telecontrol Module M 761-200
Telecontrol Module M 8A1 761-201
Telecontrol Module M 8A1 ESP 761-202
Telecontrol Module M 8AI DSP 761-203
Telecontrol Module M 8AI ESP, DSP 761-204
Telecontrol Module M WEB MODBUS 761-205
Telecontrol Module M 8A1 WEB MODBUS 761-206
Dual -band GSM modem,

including power supply unit
761-9006

Power supply/charge regulator,

115 V- 230 VAC to 24 V DC,
1 A, also for battery operation
761-9007

Battery,

12 V DC 1.2 Ah lead gel
761-9008

Outdoor housing

761-9009

TO-PASS^® configuration software,

to configure 761-1xx and 761-2xx
Telecontrol Modules
761-930

Figure

Pumping stations

Tank farm

Series machines

*You can find approvals and technical data in our Full Line Catalog, Volume 3 or at www.wago.vn.

ETHERNET
Industrial Switches
Series 852

5-Port Industrial Switch*
Supply voltage DC 9 V - 48 V
Ports: 5 x 10/100BASE-TX (RJ-45)
Dimensions (WxHxL) 50 x 120 x 105 mm

8-Port Industrial Switch*
Supply voltage DC 9 V - 48 V
Ports: 8 x 10/1 00BASE-TX (RJ-45)
2 x SFP 100BASE-FX Fiber
Dimensions (WxHxl.) 50 x 120 x 105 mm

7-Port Industrial Switch*
Supply voltage DC 9 V - 48 V
Ports: 7 x 10/100BASE-TX (RJ-45)
2 x SFP 100BASE-FX Fiber
1 x RS -232 (RJ-45)
Dimensions (WxHxl.) 50 x 120 x 105 mm

Designation Item No.
5 -Port 100BASE-TX Industrial Switch 852-101
5 -Port 100BASE-TX Industrial Eco Switch 852-111

Designation Item No.
8 -Port 100BASE-TX Industrial Switch 852-102
8 -Port 100BASE-TX Industrial Eco Switch 852-112
8 -Port 100 BASE -TX
+ 2 -Slot 100BASE-FX Industrial Switch 852-103

Designation Item No.
7 -Port 100BASE-TX
+ 2 -Slot 100BASE-FX
Industrial Managed Switch 852-104

Accessories, Series 852

SFP Module 2,

1310 nm,
100BASE-FX Multi -Mode LC,
2 Km
852-201/107-002

SFP Module 30,

1310 nm,
100BASE-FX Single -Mode LC,
30 Km
852-201/107-030

SFP Module 2,

1310 nm,
100BASE-FX Multi -Mode LC,
2 Km
852-201/107-002

SFP Module 30,

1310 nm,
100BASE-FX Single -Mode LC,
30 Km
852-201/107-030

Terminal assignment

1 Primary Power LED
2 Redundant Power LED
3 Alarm LED
4 TX port 100 Mbps LED
5 TX port INK/ACT LED
6 TX ports (5)

1 Primary Power LED
2 Redundant Power LED
3 Alarm LED
4 TX port 100 Mbps LED
5 TX port LW/ACT LED
6 10/100 Base -TX ports (8)
7 100 Base-FX LC Fiber slots (SFP-type) (2)
8 Fiber port Offline LED (2)
9 Fiber port LW/ACT LED (2)
10 Fiber port 100 Mbps LED (2)

1 Primary Power LED
2 Redundant Power LED
3 Alarm LED
4 POST LED
5 LASER ON LED for fiber-optic modules
6 Reset button
7 TX -port 100 Mbps LED
8 TX -port INK/ACT LED
9 RS -232 Console port (RJ-45)
10 TX -ports 10/100 Mbps (7)
11 100 Bose-FX LC Fiber slots (SFP-type) (2)
12 Fiber 100 Mbps LED (2)
13 Fiber port LNK/ACT LED (2)
14 Fiber port Offline LED (2)

*You can find approvals and technical data in our Full Line Catalog, Volume 3 or at www.wago.vn.

Primary Switch Mode Power Supply Units
Series 787

Output voltage DC 24 V,
open circuit and short circuit protected,
adjustable output voltage,
LED status indication, for DIN 35 rail

0.08 — 4 mm² / AWG 28 - 12

Open circuit and short circuit protected,
adjustable output voltage,
LED status indication, for DIN 35 rail

0.08 — 2.5 mm²/ AWG 28 - 14

Output voltage DC 24 V,
open circuit and short circuit protected,
adjustable output voltage,
LED status indication, for DIN 35 rail

0.08 — 2.5 mm²/ AWG 28 - 14

Output current Item No. PU
Primary switch mode power supply unit, 1 -phase
Input voltage AC 85 V - 264 V
Nominal voltage AC 230 V
DC 24 V / 2.5 A 787-712 1
Dimensions (mm) WxHx L: 50 x 92 x 136
Input voltage AC 85 V - 264 V
Nominal voltage AC 230 V
DC 24 V / 5 A 787-722 1
Dimensions (mm) WxHx L. 75 x 92 x 136
Input voltage AC 85 V - 264 V
Nominal voltage AC 230 V
DC 24 V / 2.5 A 787-732 1
Dimensions (mm) WxHx L: 110 x 92 x 136

Output current Item No. PU
Primary switch mode power supply unit, 1 -phase
Input voltage AC 100 V... 240 V
Nominal voltage AC 230 V
DC12 V/ 2 A 787-601 1
Dimensions (mm) WxHx L: 40 x 95 x 90
parallel operation, thermal overload protection
DC 12V/ 4A 787-611 1
Dimensions (mm) WxHx L: 51 x 133 x 120
DC12 V/ 8 A 787-621 1
Dimensions (mm) WxHx L: 67x 133 x 120
Input voitage AC 100 V ... 240V
Nominal voltage AC 230 V
DC 24 V / 1.3 A 787-602 1
Dimensions (mm) WxHx L: 40 x 95 x 90
parallel operation, thermal overload protection
DC 24 V / 2.5 A 787-612 1
Dimensions (mm) WxHx L: 51 x 133 x 120
Input voltage AC 100 V ... 240 V
Nominal voltage AC 230 V
DC 24 V / 5 A 787-622 1
Dimensions (mm) WxHx L: 67x 133 x 120
Input voltage AC 176 V ... 264 V/90 V ... 130 V
Nominal voltage AC 230 V/115 V (switchable)
DC 24V/ 10 A 787-632 1
Dimensions (mm) WxHx L: 115 x 87x 140
Input voltage AC 90 V ... 264 V
Nominal voltage AC 230 V, parallel operation
DC 48 V / 10 A 787-613 1
Dimensions (mm) WxHx L: 51 x 133 x 120
DC 48 V / 20 A 787-623 1
Dimensions (mm)WxHxL: 67x 133x 120
Primary switch mode power supply unit, 3 -phase
Input voltage 3 x AC 325 V ... 550 V
Nominal voltage AC 3 x 400 V
DC 24V/ 10 A 787-640 1
Dimensions (mm) WxHx L: 115 x 87x 140
parallel operation, thermal overload protection
DC 24 V/ 20 A 787-642 1
Dimensions (mm) WxHx L: 205 x 87 x 140
DC 24 V/ 40 A 787-644 1
Dimensions (mm) WxHx L: 253 x 120 x 145

Output current Item No. PU
Primary switch mode power supply unit, 3 -phase
Input voltage AC 340 V - 550 V
Nominal voltage AC 3 x 400 V
DC 24 V / 10 A 787-840 1
Dimensions (mm) WxHx L: 57 x 127 x 179
Input voltage AC 340 V - 550 V
Nominal voltage AC 3 x 400 V
DC 24 V / 20 A 787-842 1
Dimensions (mm) WxHx L: 77 x 127 x 179
Input voltage AC 340 V - 550 V
Nominal voltage AC 3 x 400 V
DC 24 V / 40 A 787-844 1
Dimensions (mm) WxHx L: 128 x 127 x 179
Primary switch mode power supply unit, 3 -phase,
with display
Input voltage AC 340 V - 550 V
Nominal voltage AC 3 x 400 V
DC 24 V / 10 A 787-850 1
Dimensions (mm) WxHx L: 57 x 127 x 179
Input voltage AC 340 V - 550 V
Nominal voltage AC 3 x 400 V
DC 24 V / 20 A 787-852 1
Dimensions (mm) WxHx L: 77 x 127 x 179
Input voltage AC 340 V - 550 V
Nominal voltage AC 3 x 400 V
DC 24 V / 40 A 787-854 1
Dimensions (mm) WxHx L: 128 x 127x 179

Please find the entire product range in our Full Line Catalog, Volume 4. More information at www.wago.vn.
For technical explanations and abbreviations, see technical section.

NHẬP KHẨU VÀ BÁN THIẾT BỊ TỰ ĐỘNG HÓA HÃNG WAGO TẠI VIỆT NAM

Email: info@wago.vn

Tel: 0944 577 000

WAGO-1/0-SYSTEM 750

I/O Module

Universal Basic Module

Exchange within the assembly

ECO Fieldbus Couplers, Fieldbus Couplers, Programmable Fieldbus Controllers Series 750

ECO Fieldbus Couplers*

Fieldbus Couplers*

Fieldbus Controllers*,

Industrial Compact PC
Digital Input Modules and Digital Output Modules

Series 758
Series 750/753

Analog Input Modules, Analog Output Modules, Specialty Modules
Series 750 and 753

PROFIsafe Modules, Ex i Intrinsically Safe Modules, System Modules
Series 750 and 753

WAGO SPEEDWAY 767
The New Performance Standard for Cabinet -Free Control

Fieldbus Couplers, Programmable Fieldbus Couplers
Input and Output Modules, Series 767
Sensor/Actuator Boxes, Series 757

TO-PASS^®
Scalable Telecontrol Solutions from Fault Detector to Intelligent Telecontrol PLC
Series 761

ETHERNET
Industrial Switches
Series 852

Primary Switch Mode Power Supply Units
Series 787

NHẬP KHẨU VÀ BÁN THIẾT BỊ TỰ ĐỘNG HÓA HÃNG WAGO TẠI VIỆT NAM

Email: info@wago.vn

Tel: 0944 577 000

WAGO-1/0-SYSTEM 750

I/O Module

Universal Basic Module

Exchange within the assembly

ECO Fieldbus Couplers, Fieldbus Couplers, Programmable Fieldbus Controllers Series 750

ECO Fieldbus Couplers*

Fieldbus Couplers*

Fieldbus Controllers*,

Industrial Compact PC Digital Input Modules and Digital Output Modules

Series 758 Series 750/753

Analog Input Modules, Analog Output Modules, Specialty Modules Series 750 and 753

PROFIsafe Modules, Ex i Intrinsically Safe Modules, System Modules Series 750 and 753

WAGO SPEEDWAY 767 The New Performance Standard for Cabinet -Free Control

Fieldbus Couplers, Programmable Fieldbus Couplers Input and Output Modules, Series 767 Sensor/Actuator Boxes, Series 757

TO-PASS® Scalable Telecontrol Solutions from Fault Detector to Intelligent Telecontrol PLC Series 761

ETHERNET Industrial Switches Series 852

Primary Switch Mode Power Supply Units Series 787

Industrial Compact PC
Digital Input Modules and Digital Output Modules

Series 758
Series 750/753

Analog Input Modules, Analog Output Modules, Specialty Modules
Series 750 and 753

PROFIsafe Modules, Ex i Intrinsically Safe Modules, System Modules
Series 750 and 753

WAGO SPEEDWAY 767
The New Performance Standard for Cabinet -Free Control

Fieldbus Couplers, Programmable Fieldbus Couplers
Input and Output Modules, Series 767
Sensor/Actuator Boxes, Series 757

TO-PASS^®
Scalable Telecontrol Solutions from Fault Detector to Intelligent Telecontrol PLC
Series 761

ETHERNET
Industrial Switches
Series 852

Primary Switch Mode Power Supply Units
Series 787